Skin Safe Liquid Silicone Rubber For Prosthetic Shoe Insole Making
- Minimum Order Quantity
- 200kg Bottle
- Price Range
- 6.00 - 8.00 USD ($)
- 7 USD ($)
- Product Name
- platinum cure liquid silicone rubber for insole
- Product Type
- liquid silicone rubber
- casting for insole
- 1.08 Kilogram per cubic meter (kg/m3)
- 8 shore a
Description of insole silicone rubber :
It is a two-component addition organic silicone (platinum catalyst ) which can be cured at room temperature and also can be heat cured.It is colorless or skin-colored oily liquid and becomes soft elastic material after vulcanization, can be used for making soft silicone rubber material.
Feature of insole silicone rubber :
1.FDA & ROHS certificate.
2.No limitation with product thickness .Can do deep curing .
3.High temperature resistance (can reach 0~250 degrees ) ,acid and alkali-resistance and aging resistance
4.Light viscosity and good flowability .easy for pouring operation .
5.Can be cured both at room temperature or be heated
6.Low shrinkage .Not releasing low molecular during cross-linking process .So the volume is constant .The shrinkage rate is less than 0.1%.
7.Favorable tensile and tear strength
8.High temperature resistance ,acid and alkali-resistance and aging resistance
9.High duplication times .aging -resistance
10.Tasteless.no flammable,safe and reliable
11.Customize as you need
Application of insole silicone rubber :
1) Make soft products,such as insole sex toys, sex dolls, body organs;
2) Body breast enhancers, bra pads, shoulder pads, paster, patches, antislip mat;
3) Human body shape, simulate robots, simulate props;
4)Simulate people,prostheses ,masks
Operation Instruction for platinum cure liquid silicone rubber for insole
Step 1: Prepare the molds
Prepare an perfect mold and clean it totally before operation .
ï¼Notes: Make sure your molds and operation tool cleaned up totally to avoid uncure problem .
Step 2: Mix part A and part B evenly
Take 100 G part A and 100 G part B and mix them evenly.
ï¼Notes: Addition cure mold making silicone rubber is two parts flowing liquid, Please follow the step strictly:
1. Weigh the two part exactly by electronic weight.
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2. Mix part A and part B evenly.
Otherwise the silicone rubber will be partly cured and this will give birth to difficulties in your final operation. Whatâs more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting
Clean your molds and brush a layer of release agent (detergent or soap water )on your molds .Pouring the vacuumed mixture silicone on your molds.
Warm tips :
As addition cure silicone is a kind of platinum cure system, which will be easy to cause uncure problem, so kindly follow the tips below
ï¼Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone
ï¼Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
ï¼Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
- FOB Port
- Payment Terms
- Paypal, Western Union, Telegraphic Transfer (T/T), Cash in Advance (CID)
- Supply Ability
- 120 Bottle tons Per Month
- Delivery Time
- 3-5 Days
- Sample Available
- Sample Policy
- Free samples available with shipping and taxes paid by the buyer
- Packaging Details
- 10KG 20kg 25kg or 200kg /drum
- Main Export Market(s)
- Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
- Main Domestic Market
- All India
- MSDS rohs FDA